Acer Dynamic Lathes

ACER DYNAMIC 1340G HIGH SPEED PRECISION LATHE 

  • 1-1/2" Spindle Bore with D1-4 Camlock Spindle Nose
  • 3 HP Spindle Motor 
  • 9 Spindle Speed: 80 ~ 2,000 RPM
  • Hardened and Ground Bedways
  • Precision ground gears in headstock
  • Spindle is equipped with precision taper roller bearings
  • Enclosed gearbox and feedscrew w/ built-in safety overload friction clutch
  • Apron handwheel is supplied at left side of carriage
  • Tailstock barrel with Metric / Inch scale
  • Equipped with Electro-magnetic controlled switch
  • Metric or Imperial Specifications supplied according to consumer's instruction

ACER DYNAMIC 1440G HIGH SPEED PRECISION LATHE 

  • New welded steel construction machine base 
  • 1-9/16" Spindle Bore with D1-4 Camlock Spindle Nose
  • 3 HP Spindle Motor
  • 8 Spindle Speeds: 85~ 2,000 RPM
  • Hardened and Ground bedways
  • Precision ground gears in headstock 
  • Spindle is equipped with Precision Taper Roller bearings 
  • Enclosed gearbox and feedscrew w/ built-in safety overload friction clutch
  • Apron handwheel is supplied at left side of carriage
  • Tailstock barrel with Metric /Inch scale
  • Fitted with Electro-Magnetic controlled switch

ACER DYNAMIC 1740G - 1780G HIGH SPEED PRECISION LATHE 

  • 2-1/4" Spindle Bore with D1-6 Camlock Spindle Nose
  • 7.5 HP Spindle Motor
  • Hardened and ground Meehanite Casting Bedway
  • Hardened Ground gears and Spindles
  • 12 Spindle speeds: 50 ~ 1,800 RPM
  • Thread chasing dial
  • ​Automatic Longitudinal Multiple Feed Stop

ACER DYNAMIC 2140GH - 21120GH HIGH SPEED PRECISION LATHE 

​
  • 3.34" Spindle Bore with D1-8 Camlock Spindle Nose
  • 10 HP Single speed motor for 220V / 440V 3 Phase 60 HZ wiring
  • 18 Spindle Speeds: 25 ~ 1,540 RPM
  • Hardened and ground Meehanite Casting Bedway
  • Hardened and Ground Gears and Spindle
  • Quick change Gear Box with Direct Selection for Inch / Metric Thread
  • New Welded steel construciton Machine base

ACER DYNAMIC 2460G & 24160G HIGH SPEED PRECISION LATHE

  • 4-1/8" Spindle Bore with D1-11 Camlock Spindle Nose
  • 15 HP Single Speed Motor for Phase 60 HZ Wiring
  • 12 Spindle Speeds: 25 ~1200 RPM
  • Hardened and ground Meehanite Casting Bedway
  • Hardened and Ground Gears and Spindle; A/B Switches      w/ CE Standard
  • Headstock with magnetic clutch & Electric Brake
  • Rapid Crossfeed & Carriage Traverse
​

ACER DYNAMIC 2960G & 29160G HIGH SPEED PRECISION LATHE

  • 4-1/8" Spindle Bore with D-11 Camlock Spindle Nose
  • 15 HP Spindle Speed Motor for 3 Phase 60 HZ Wiring
  • 12 Spindle Speeds 25 ~ 1200 RPM
  • Hardened and ground Meehanite Casting Bedway
  • Hardened and Ground Gears and Spindle
  • Headstock with Magnetic Clutch & Electric Brake
  • Rapid Crossfeed & Carriage Traverse

For more information on the lathe models please check out the specifications pages.
Want to see even more lathes, check out our E- Lathes