Double nut design on crossfeed leadscrew for continuous backlash adjustment.
2 axes automatic movement.
Safety 24 volt circuit control.
Auto lube system.
22" wide double V crossfeed ways.
2,970 lbs of full Meehanite casting.
19 3/4" from table top to the center of spindle.
Package with parallel dresser, dust suction & coolant system, halogen light, and permanent magnetic chuck.
ACER AGS-1020AHD High Precision Surface Grinder
Note: Downfeed is now counter-clockwise.
Reinforced high column & heavyweight Meehanite casting.
Direct drive spindle equipped with 4 ABEC-7 angular contact ball bearing.
Spindle motor: 2 HP V-3 graded spindle motor.
10" x 20" grinding capacity
3 axes auto movement, easy to operate & maintain.
Auto surface & plunge downfeed.
24 volt circuit control.
Double-V crossfeed ways; one V, one flat table ways.
Auto-lube system.
Dual hydraulic pump system: one each for auto incremental downfeed and table longitudinal travel.
Large volume hydraulic tank.
Double nut design for crossfeed leadscrew.
19 3/4" from table top to the center of spindle.
Extra wide saddle at 24 1/2".
Package with parallel dresser, dust suction & coolant system, halogen light and magnetic chuck.
ACER AGS-1224AHD Precision Surface Grinder
Note: Downfeed is now counter-clockwise.
Reinforced high column & heavyweight Meehanite casting.
Direct drive spindle equipped with 4 ABEC-7 angular contact ball bearing.
5 HP V-3 graded spindle motor.
12" x 24" grinding capacity.
3 axes auto movement, easy to operate & maintain.
Auto surface & plunge downfeed
Built-in chuck control for electromagnetic chuck
24 volt circuit control.
Double-V crossfeed ways; one V, one flat table ways.
Auto-lube system.
Dual hydraulic pump system: one each for auto incremental downfeed and table longitudinal travel.
Large volume hydraulic tank.
Rapid power elevation.
Double nut design for crossfeed leadscrew.
23 1/2" from table top to the center of spindle.
4,180 lbs of full Meehanite casting
Extra wide saddle at 30 1/2".
Package with parallel dresser, dust suction & coolant system, halogen light and magnetic chuck.
ACER AGS-1632AHD High Precision Surface Grinder
Fully ribbed column ensures the highest rigidity.
Overhead parallel dresser.
Spindle run-out within 0.0001".
Cartridge type spindle with four class 7 high precision angular contact ball bearings.
Complete splash guard.
Longitudinal push-in handwheel.
Bearing type directional control arm.
Double-V Turcite-B laminated saddle ways.
Crossfeed driven by AC motor and timing belt.
Auto downfeed system increment from 0.0001" to 0.001".
Levelling bolts and pads.
Rapid elevation is standard.
Insert type coolant nozzle.
Halogen work light.
Electromagnetic chuck with demagnetizer.
Turcite-B lined one V & one flat table way.
Dual hydraulic pump system: one each for auto incremental downfeed & table longitudinal travel.
Enlarged hydraulic tank to cut down thermal effect on hydraulic oil viscosity.
Separate electrical power cabinet; easy maintenance design.
ACER AGS-2040AHD High Precision Surface Grinder
Column type movement machine.
One V and one flat table slideways are coated with Turcite-B.
Reinforced column with Meehanite cast iron allows for heavy duty grinding.
Double-V crossfeed ways are laminated with Turcite-B.
Recirculating auto lubrication system ensures all moving parts are properly lubricated.
Spindle uses four Class 7 high precision angular contact ball bearing. They are sealed and greased for life.
Enlarged hydraulic tank with dual pump design allows for accurate downfeed and smooth table movement.
Hydraulic temperature is kept constant by a separated cooling system. This is to make sure oil temperature will not rise more than 20° over room temperature.
Mechanical downfeed designed for easy maintenance.
V 3 graded 10 HP spindle motor.
Maximum grinding capacity is 20" x 40".
Front setting crossfeed dials allow users to set work piece distance without moving away from control panel.
ACER AGS-2040SD High Precision Surface Grinder
V3 graded 10 HP spindle motor.
Z axis Servo Motor
NC Control Ball Screw.
Recirculating auto lubrication system ensures all moving parts are properly lubricated.
Reinforced column with Meehanite cast iron allows for heavy duty grinding.
Double-V crossfeed ways are laminated with Turcite-B.
Mechanical downfeed designed for easy maintenance.
Maximum grinding capacity is 20" x 40".
If your interested in these machines or have any questions please contact us